Archive

Archive for the ‘Tower/Floor Standing’ Category

JJM-001 Home Theatre Loudspeakers


final_full[cropped].jpg

Designed, Constructed, and Tuned by Jonah Mueller

Design Goals:

  • Floor-standing for Home Theatre
  • Full Range 2.0 System
  • Flat Frequency Response
  • Pleasing Sound & Looks

Key Features:

  • Vented Cabinet Design
  • +/- 2dB Frequency Response
  • F3 of 19.5Hz when placed near wall (45Hz free air)
  • <1% Harmonic Distortion
  • Smooth Off-Axis Roll-Off

Drivers:

  • SB Acoustics SB26STAC-C000-4 1″ Textile Dome Tweeter
  • Dayton Audio RS225-8 8″ Aluminum Cone Woofer

Frequency Response (Integrated):Integrated Frequency Response.png

Off-Axis Response:

Off-Axis Response.png

Harmonic Distortion:

Harmonic Distortion.png

Speaker Glossy

Research Paper

Smooth Smith Audio – 312c

April 29, 2017 Leave a comment

transducer_cp-7927jpg_34129667062_o

Designed by Eric “Smooth” Smith

Design Goals:

  • Hybrid as mixing monitors and entertainment system
  • Partially mobile/ Easy to fit in smaller spaces
  • Flat frequency response with variable low end
  • Budget: $2500

Key Features:

  • F3 of 28Hz
  • Sealed enclosure
  • +/- 1 dB from 150Hz to 20kHz
  • +/- 2 dB from 30Hz to 150Hz
  • MiniDSP active crossover @ 130 Hz, passive crossover at 3.5kHz
  • 1/2″ MDF, 1/2″ Cherry MDF

Drivers:

  • Eton 25SD-1 1″ Soft Dome Tweeter
  • Dayton Audio RS150P-4 6″ Paper Cone Woofer
  • Dayton Audio RSS315HF-4 12″ Aluminum Cone Woofer

 

Frequency Response:

 

F - 60

Integrated Frequency Response:

F IntOff-Axis Response

F - Horizontal Off-Axis

Harmonic Distortion

F - Harm Dist

Rear Sub-woofer Connection

transducer_cp-8318jpg_34246999196_o

TUX-01

April 28, 2017 Leave a comment

Speakers 1Designed by Andrew Summers

Design Goals:

  • Create a rugged speaker system that is ready for the road
  • Flat frequency response for accurate mixing
    • +/- 3dB or better

Key Features:

  • 2.5 way hybrid crossover
    • Combination of miniDSP and passive crossover point in-between tweeter and mid-woofer
    • 2nd order crossover at 200Hz between mid- and sub-woofer (active)
    • 2nd order low pass filter on mid-woofer at 800Hz (passive)
    • 2nd order high pass filter on tweeter at 3kHz (passive)
  • F3 of 48Hz
  • +/- 2dB from 20kHz to 50Hz
  • Sealed enclosure
  • All SB Acoustics drivers
    • Sub-woofer – SB29NRX75
    • Mid-woofer – SB13PFC25-08
    • Tweeter – SB26STCN-C000-04

Construction:

  • 1/4″ birch ply on all exterior walls
  • 1/2″ birch ply on front baffle
  • 1/2″ MDF on all interior walls
  • 1/2″ birch panel in between mid-woofer and sub-woofer to create a separate sub cabinet
  • 1/4″ aluminum extrusions
  • Aluminum corner caps
  • Rust-oleum Black Truck Bed Liner finish

Tux FR

FR Full System All Axis

TUX-01 Research

TUX Speaker Glossy

Not Your Grandpa’s Speakers


26738402275_a9b58aa026_k

Designed by: Mike Schmitz

Design Goals

  • Casual listening
  • Large and noticeable
  •  Unique aesthetics
  • Passive

Key Features

  • F3 of 26 Hz
  • +/- 6 dB 26 Hz to 18 kHz
  • 2nd Order Crossover at 250 Hz, 4th Order Crossover at 2.5 kHz
  • Wide Dispersion
  • Cost less than $1200
  • Ported design
  • 3/4 in. MDF and 1/2 in. Baltic Burch construction with Maple trim.

Drivers
Tweeter – Fountek Neo X 2.0 Ribbon
Midrange – SB Acoustics SB15MFC30-4
Woofer – SB Acoustics SB29NRX75-6

Frequency Response
F-FQ
Integrated Frequency Response
F-IFQ
Not Your Grandpa’s Speakers Glossy
Not Your Grandpa’s Speakers Research Paper

TW-84 Home Entertainment Speakers

April 29, 2016 Leave a comment

TW-84 Pic

Design Goals

  • Pleasurable
  • Fairly Flat Frequency Response
  • Passive Crossover
  • Ported Enclosure For Increased Low End
  • Pair With External Subwoofer
  • Sound Good Alone As Well

Key Features 

  • WxDxH = 1′ x 1′ 3/8″ x 3′ 9 1/2″
  • +/- 2dB from 40-20,000Hz
  • 2 Way Design
  • F3 of 37 Hz

Drivers

  • Scanspeak D2604/32000
  • Dayton Audio RS225

 

Frequency Response

Frequency

Documentation: 

Design & Final Testing Report

Glossy

AJJ 994’s 3-Way Floorstanding Passive System

April 28, 2016 Leave a comment

IMG_8937

Designed by: Andrew ‘AJ’ Diehl

Design Goals:

  • Sealed enclosure for tight response
  • Passive because it’s awesome
  • Tight bass
  • Accurate reproduction of sound for crucial listening

 

Key Features:

  • F3 of 39 Hz
  • +/- 3 dB from 90 Hz to 22 kHz
  • 3rd Order Crossover at 2 kHz and 130 Hz
  • Additional 3rd Order Crossover at 300 Hz on Subwoofer
  • Optional 45 Hz Notch Filter on Subwoofer to control nasty resonance
  • Artist from Chicago will be painting both speakers in abstract form

 

Drivers:

  • Tweeter:
    SB Acoustics SB29RDC-C000-4 Ring Dome Tweeter
  • Mid-Woofer:
    SB Acoustics SB15NRXC30-4 5″ Woofer
  • Subwoofer:
    SB Acoustics SB34NRX75-6 12″ Woofer

Screen Shot 2016-04-28 at 4.51.51 AMScreen Shot 2016-04-28 at 4.51.40 AM

Side note on responses: notch filter is included in final results.

Download Glossy: AJJ 994 Speaker Glossy
Download Report: AJJ-994 Transducer Report

TPA-1000 Home Theater Speakers


17139387268_805875155f_z

Design By:

Paul Bristol

Key dseatures

  • Tall, Slender Design
  • F3 of 48Hz
  • +/- 3dB response from 100 Hz-20 kHz
  • For Use with External Sub
  • Large Stereo Image/ Wide Dispersion

Drivers

  • Woofers: Seas Prestige L16N-SL 6” Woofer
  • Tweeter: Eton 25SD-1 1” Soft Dome Tweeter

Frequency Response

Screen Shot 2015-04-30 at 9.52.37 PM

Integrated Frequency Response

Screen Shot 2015-04-30 at 9.57.46 PM

Horizontal Off Axis

Screen Shot 2015-04-30 at 10.42.38 PM

TPA-1000 Speaker Glossy

Design and Testing

TPA-1000 Final Drafting