Archive

Archive for the ‘Enclosure Type’ Category

TNS6

April 27, 2018 Leave a comment

P1310459.jpg

The TNS6 or “Temporarily Named Speaker 6” is a 2 way loudspeaker.

Design Goals:

  • Relatively small size suitable for resting on a desk with maintaining maximum desk space.
  • Crisp transients while reaching an f3 of at least 60Hz
  • Natural wood aesthetic

Technical Specifications:

  • Tweeter: Dayton Audio ND20FB-4
  • Woofer: Dayton Audio RS225-8
  • +/- 2db 49Hz-20kHz
  • f3 of 47Hz
  • Dimensions 11.25″ x 10.25″ x 19.75″Frequency2.PNG

Schatz_Transducer_Binder

Speaker Glossy

Advertisements

Gust Op. 1

April 27, 2018 Leave a comment

 

Gust Op.1

Designed by Jacob Gust

Design Goals:

  • Active Home Theater Loudspeakers
  • Warm & Unique Sound
  • Extended Low Range
  • Even Off Axis Listening
  • Pleasing To Look At

Features:

  • Ribbon Tweeter, 5″ Mid, & 8″ Woofer
  • Passive 3kHz Crossover between Tweeter & Mid
  • Dual Internal Volume Design with Crossover Cubby
  • Matching Custom Speaker Stands
  • F3 of 30Hz
  • +/- 3dB from 30Hz-20kHz

Frequency Response:

Gust Freq

Integrated Frequency Response:

Gust Integrated Freq

Off-Axis Response:

Gust Off Axis.png

Harmonic Distortion:

Gust Harmonic.png

Gust Op. 1 Glossy

Gust Op. 1 Technical Binder

MC8R Studio Reference Monitors


 

IMG_0469Designed by Michael Chopp

Design Goals:

  • Portable music mixing monitors for professional use
  • Flat frequency response full range
  • $1000 budget
  • Natural wood look – visually appealing

Key Specifications:

  • Drivers
    • Fountek Neo X 2.0 Ribbon Tweeter
    • Fountek 8″ FW200 Midwoofer
  • F3 of 40Hz – Vented Enclosure
    • 2″ port on front baffle
  • +/- 1.5dB from 50Hz – 20kHz
  • 0.1% THD from 50Hz – 20kHz
  • Dimensions: 13″ x 22″ x 17″ (w, h, d)
  • MiniDSP active crossover
    • Tweeter at 1.8kHz
    • Woofer at 2.2kHz
  • Baltic birch exterior, MDF interior

Frequency Response:

Screen Shot 2018-04-26 at 12.11.46 PM

Integrated Frequency Response:

Screen Shot 2018-04-26 at 12.11.31 PM

Off Axis Response:

Screen Shot 2018-04-26 at 12.20.03 PM

Harmonic Distortion:

Screen Shot 2018-04-26 at 12.19.47 PM

MC8R Design Binder

MC8R Speaker Glossy

 

 

Smooth Smith Audio – 312c

April 29, 2017 Leave a comment

transducer_cp-7927jpg_34129667062_o

Designed by Eric “Smooth” Smith

Design Goals:

  • Hybrid as mixing monitors and entertainment system
  • Partially mobile/ Easy to fit in smaller spaces
  • Flat frequency response with variable low end
  • Budget: $2500

Key Features:

  • F3 of 28Hz
  • Sealed enclosure
  • +/- 1 dB from 150Hz to 20kHz
  • +/- 2 dB from 30Hz to 150Hz
  • MiniDSP active crossover @ 130 Hz, passive crossover at 3.5kHz
  • 1/2″ MDF, 1/2″ Cherry MDF

Drivers:

  • Eton 25SD-1 1″ Soft Dome Tweeter
  • Dayton Audio RS150P-4 6″ Paper Cone Woofer
  • Dayton Audio RSS315HF-4 12″ Aluminum Cone Woofer

 

Frequency Response:

 

F - 60

Integrated Frequency Response:

F IntOff-Axis Response

F - Horizontal Off-Axis

Harmonic Distortion

F - Harm Dist

Rear Sub-woofer Connection

transducer_cp-8318jpg_34246999196_o

Transducer Speaker Project

April 28, 2017 Leave a comment

Speakers

Designed by Luke Dixon

Drivers

-2, 1″ SB Acoustic Textile Dome Tweeters

-2, 8″ SB Acoustic Paper Cone Woofers

About

-Sealed Enclosure

-2 way Active Crossover

-Hand Crafted Cabinets

-Low Frequency boost

Design Goals

-Casual speakers to use for home entertainment

Final Frequency Plot

MFinal


Speaker Glossary


Speaker Research

NC-17 Reference Monitors

April 28, 2017 Leave a comment

34301479095_2742916816_z

Designed by Nick Cecconi

Design Goals:

  • Mixing monitors for home
  • Inspired by C-17 airplane
  • Flat frequency response
  • Budget: $1000

Key Features:

  • F3 of 56 Hz
  • Vented enclosure
  • Battleship gray finish
  • Dimensions: 12” x 15” x 17”
  • +/- 1 dB from 56 Hz to 18 kHz
  • MiniDSP 2-way crossover @ 1.8 kHz
  • 1/2″ Maple w/veneer core, 1/2″ MDF

Drivers:

  • SB Acoustics SB26STAC 1″ Textile Dome Tweeter
  • SB Acoustics SB23NACS 8″ Aluminum Cone Woofer

Frequency Response:

LeftTuned_v2-1

Integrated Frequency Response:

Integrated Frequency Response.png

NC-17 Research Paper

NC-17 Speaker Glossy

http://www.nickcecconi.com

TUX-01

April 28, 2017 Leave a comment

Speakers 1Designed by Andrew Summers

Design Goals:

  • Create a rugged speaker system that is ready for the road
  • Flat frequency response for accurate mixing
    • +/- 3dB or better

Key Features:

  • 2.5 way hybrid crossover
    • Combination of miniDSP and passive crossover point in-between tweeter and mid-woofer
    • 2nd order crossover at 200Hz between mid- and sub-woofer (active)
    • 2nd order low pass filter on mid-woofer at 800Hz (passive)
    • 2nd order high pass filter on tweeter at 3kHz (passive)
  • F3 of 48Hz
  • +/- 2dB from 20kHz to 50Hz
  • Sealed enclosure
  • All SB Acoustics drivers
    • Sub-woofer – SB29NRX75
    • Mid-woofer – SB13PFC25-08
    • Tweeter – SB26STCN-C000-04

Construction:

  • 1/4″ birch ply on all exterior walls
  • 1/2″ birch ply on front baffle
  • 1/2″ MDF on all interior walls
  • 1/2″ birch panel in between mid-woofer and sub-woofer to create a separate sub cabinet
  • 1/4″ aluminum extrusions
  • Aluminum corner caps
  • Rust-oleum Black Truck Bed Liner finish

Tux FR

FR Full System All Axis

TUX-01 Research

TUX Speaker Glossy